2.) Pestaña "FRP-PATTERN-PRIVACY"
3.) Seleccionan el Procesador "MT6737M"
4.) Cargan el loader en la parte que dice "Custom Loader" (MTK_AllInOne_DA_SP.bin) (Archivo Adjunto)
5.) Clic en "[FM]Reset FRP"
6.) Conectar celular apagado y esperar a que termine el proceso
LOG:
Exe version: NCKBox AndroidMTK 1.8.8.7
Selected model: MT6737M
Action: Reset FRP
Will be used loader: MTK_AllInOne_DA_SP.bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM18)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 2.
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847346132
EMMC FW VERSION: a5:00:00:00:00:00:00:00
EMMC CID: 90014A48384734 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
-Reading GPT Drive OK
Checking data, wait...
Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.
Archivo Editado: Ramos Compucell
